Renove LVT, PVC and carpet installation adhesive
Low-emission, fiber-reinforced, polymer dispersion-based adhesive for LVT Dryback coverings. Provides excellent adhesion and short pre-hardening time. Prevents shrinkage of vinyl panels. Solvent-free. Designed for indoor use. The adhesive is suitable for the installation of all panels, LVT tiles, soft and rigid PVC coverings, rubber floors up to 4 mm thick, and jute and latex-backed carpets due to its high initial adhesion. Suitable for both industrial and commercial use. Wet installation adhesive. Can also be used on surfaces with underfloor heating. For extreme loads, it is recommended to use Renove single-component hybrid adhesive.
LVT adhesive is intended for use on absorbent and filled mineral substrates. The substrate must be dry, strong, stable and free from dust and other contaminants. All residues that may affect adhesion must be removed. The cement and anhydrite layer must be sanded or brushed off. INSTRUCTIONS FOR USE Stir before use. Apply to the surface with a notched trowel or roller.
TECHNICAL DATA
Base material : polymer dispersion
Color: white
Density: 1.25 g/cm³
Waiting time : about 10 minutes
Open time: about 30 minutes
Load: foot traffic after approximately 3-4 hours; full load after approximately 48 hours
Grouting: after 24 hours
Temperature and humidity: substrate temperature above 15°C, relative humidity below 65%
Consumption: 200-300 g/m² depending on the substrate, material and A1 or A2 trowel used
Cleaning: uncured glue – water; hardened glue – acetone
Packaging: 12 kg plastic bucket
STORAGE 12 months in original packaging at a temperature of +10°C to +20°C.
Protect from freezing.
According to current legislation, the product does not contain chemicals hazardous to health.